WET System has excellent resistance to yellowing, impact and abrasion, household detergents and complies with class B s1 d0 fire reaction standards.
It is a technical coating with a maximum thickness of 1.5 mm, consisting of a fibreglass fabric, a waterproofing primer and a system of transparent finishes, guaranteeing excellent water resistance, excellent resistance to cracking and excellent adhesion strength, even after immersion in an alkaline environment.
It can be applied to concrete, plasterboard, civil plaster, PVC, glass or tile surfaces. Therefore it is also suitable for installation on existing surfaces, enabling rapid renovation work with limited construction site disruption.
The printing technology uses water-based, solvent-free inks.
It is suitable for wet areas or areas in direct contact with water, such as bathrooms, showers, gyms, spas, in both residential and contract applications.
Technical features |
Description of material |
Special technical covering for humid interiors (bathrooms, kitchens, gyms, wellness centres) |
Nature of components |
Substrate: printed fibreglass – Transparent finishes and waterproof primer |
Total weight (minimum ÷ maximum) |
Fibre: 290 g/m² ÷ 310 g/m2 / Complete system: 740 g/m² ÷ 780 g/m² |
Total thickness (minimum / maximum) |
Fibre: 0.5 mm / Complete system: 1.5 mm |
Adhesion to the substrate |
Category 2 according to EAG022 (adhesion force > 0.5 Mpa) |
Resistance to water |
No passage of water under the applied pressure of 150 kPa for 7 days. |
Resistance to cracks |
Category 3 according to ETAG 022 |
Initial adhesion |
Category 2 according to ETAG 022 |
Adhesion after temperature cycles |
(1.40 ± 0.16) MPa Category 2 according to ETAG 022 |
Adhesion after immersion in water |
(1.35 ± 0.10) MPa Category 2 according to ETAG 022 |
Adhesion after immersion in alkaline environment |
(1.12 ± 0.04) MPa Category 2 according to ETAG 022 |
Certifications |
Reaction to fire |
Class B s1 d0 |
Reviews
There are no reviews yet.